# - set up the USB port for VT100 access as the device console. # - MCL Hack! - from: /mastmees/STM32F030F4-VGA/blob/master/STM32F030F4/Firmware/ChibTerm/readme_osx_serial_console Np:op: same as np:ep except for parodd (but parodd is overridden). set PASS8, giving cs8 -parenb -istrip -inpck. Login has to be rely on the hardware anyway. # not to force cs8 and let the hardware handle the parity. It would probably better for getty not to The fake parity garblesĬharacters on non-terminals (like pccons) that don't # ap: same as ep except -inpck instead of inpck Same as ep except odd parity (cs7 parenb parodd) for login. login will use even parity (cs7 parenb -parodd). Use raw mode (cs8 -parenb) (unless rw is set) and # (none): same as even except -inpck instead of inpck for login. # Parity defaults to even, but the Pc entry (part of the contents of 'gettytab' file are shown. Has the definition info for the VT100 terminal that connects to theīy the Z80 'NorthStar' SBC (Single Board Computer)).Įdit to '/etc/gettytab' to get VT-100 serial port access to work: The place in gettytab where baudrate, parity,Ĭu.usbserial-AC00HEIO - the USB serial port, created by the FTDI usr/libexec/getty - the tty program, uses: /etc/gettytab The 'ist' file defines an application called: serialconsole

plist file with the name for the USB port on YOUR MacBook. Name the device with a different hex string. What the USB device is called on your MacBook. You should be able to do a 'ps -aux'Īll running sessions), or do a 'ls -l' of the '/dev' directory to see Invoked and the device gets created in '/dev' directory, when a USBĭevice is plugged in. The USB driver, which creates the 'cu.usbserial-AC00HEIO' device, gets It will be a different name on a different MACbook. The serial port running thru the USB port on the MACbook, is called You may need to be root on the Mac to do this. Z-80 NorthStar computer control your MacBook 'bash' This is usefulįor testing a VT-100 serial board, and also if you want to have your You can use a USB serial port, to LOGIN & access a MacBook. Login to USB Serial Port - using a VT100 or any Terminal - Apr.

VT-100 Terminal Board (Geoff Graham-Peter Hizalev software/hardware design), with VGA monitor & PS-2 keyboard, logged into MacBook on USB serial port, running 'top' to display most active sessions.

Mac vt 100 emulator